Home > Hp Laserjet > HP 4050 Printer - Print Quality Problem

HP 4050 Printer - Print Quality Problem


Select Supplies Status Page from the Print Information Pages drop-down menu. Click Utility, and then click Open Printer Utility. Use a lint-free cloth to clean any excess toner from the transfer belt surface. Remove the toner cartridge from the printer and rotate it back and forth. weblink

Click here to join today! Press On Line 02 WARMING UP The printer is warming up and is not ready to accept data. Often print- quality problems can be handled easily by making sure that the printer is properly maintained, using print media that meets HP specifications, or running a cleaning page. Press the MENU button on the printer control panel until Print quality menu appears in the printer display. see this here

Hp Laserjet Cleaning Utility

Clean the printer as described in 'Cleaning the Printer' in Chapter 7. Make sure the humidity and temperature are within specifications. These products are now supported by Hewlett Packard Enterprise.

  • Contact HP Support to schedule a repair or replacement.
  • The following procedure might allow a current print job to finish printing before replacing the print cartridge.
  • You can check this using the printers self test page (from the control panel) and change the setting from the control panel too.
  • Join over 733,556 other people just like you!
  • If the random spots are multiple colors, replace the drum kit.
  • The drum is light sensitive, and exposure to light can cause permanent damage.
  • Follow the instructions on the cleaning page to complete the cleaning process NOTE: For the cleaning page to work properly, print the page on copier grade paper (not bond or rough
  • If this solves the problem, consult with the letterhead-printing source to verify that the paper used meets the specifications for this printer.
  • Understanding Printer Messages Printer Messages Message Description Recommended Action 00 READY The default ready message.
  • Set the Default Printer to Last Printer Used.

The imaging drum might have been exposed to light. Make sure the ready light is on. The Self Test/Device Configuration page prints. How To Clean Transfer Roller Use paper that meets HP paper specifications.

Step 6: Replace a low or empty toner cartridge If the toner cartridge is low or empty, replace it. How To Clean Hp Laserjet Printer Rollers Open a document, click File, click Print, and then click Show Details. Excess toner may have been deposited on the transfer belt. Do not blow on the imaging drum.

Replace the fuser kit. Hp Laserjet P1102w Cleaning Page Once the paper is loaded in Tray 1, the printer will complete the cleaning process. Repair fees might apply for out-of-warranty products. Also, after a paper jam has occurred, there may be some toner remaining on the rollers and guides inside the printer.

How To Clean Hp Laserjet Printer Rollers

Use a smoother, xerographic paper. my company by kudachip on Jan 27, 2011 at 4:28pm Add comment Please sign in to comment 0 Quill is a sore subject. Hp Laserjet Cleaning Utility If the Toner low message appears, but the printer continues printing, then Toner low = continue is set in the Configuration menu on the printer’s control panel. Hp Laserjet 4000 Maintenance Kit The humidity content of the paper is too high or too low.

Restore password × Upload manual upload from disk upload from url Thank you for your help! × AdBlocker Detected! http://train2solution.com/hp-laserjet/hp-laserjet-printer-problem.html If shaking the cartridge does not improve the print quality, replace the toner cartridge. Open the rear door of the fusing assembly, if necessary Pull the jammed paper from the fusing assembly. Print a Configuration page to verify the remaining life of the transfer belt. Hp Laserjet Pro 400 Cleaning

If EconoMode is used full time, the toner supply might outlast the mechanical parts in the toner cartridge. Replace the imaging drum. If you were unable to find any damage to the toner cartridge, continue to the next step. check over here Click the Services tab.

Privacy Policy Terms of Use Solving Printer Problems Introduction Clearing Paper Jams Paper Pickup and Transfer Guide Areas Fusing Assembly Area - Top Cover Paper Jams: Rear Cover - Fusing Assembly Hp Laserjet 4050 Troubleshooting No action required. 06 TYPEFACE LIST Printing a Typeface List. (Note that PCL/Postscript formats are different.). Press any key to take printer out of Power Save mode.

The Cleaning Page prints.

Press SELECT to print the Configuration page. Click OK, and then click OK to print the job. Step 5: Check the toner level You can check the toner level by printing a Supplies Status page, or by checking the Supplies Status on the Embedded Web Server (EWS) if Hp Laserjet 4000 Troubleshooting top Sharkskin Images with sharkskin have a rough, mottled finish.

The paper does not meet HP specifications. Load plain, white paper in the input tray. Loading... http://train2solution.com/hp-laserjet/hp-4100tn-printer-problem.html top Managing the print cartridge HP policy on non-HP print cartridges The Hewlett-Packard Company cannot recommend use of non-HP print cartridges, either new or remanufactured.

top Non-adhering toner There is excess toner in the printer. Right-click your printer, and then depending on the software program, the button might be Properties, Options, Printer Setup, Printer, or Preferences. After the process is complete, the printer returns to the READY state. top Frequency To ensure good print quality with certain types of paper, use the cleaning page procedure every time the print cartridge is replaced.

These usually appear as black or white marks on the page. Yes, I'll Whitelist Cancel ERROR The requested URL could not be retrieved The following error was encountered while trying to retrieve the URL: Connection to failed. Troubleshooting the optional hard diskpage 205................................................................................................................................................................ Replace the transfer belt if necessary.

top Sunburn Images with sunburn have streaked or blurred lines across the length of the page (side-to-side on up-and-down paper, or top-to-bottom on sideways paper). Step 7: Print a cleaning page During the printing process, paper, toner, and dust particles can accumulate inside the printer. by moe on Jan 27, 2011 at 10:29am Add comment Please sign in to comment my thougts as well, but changed toner and experienced the same issue.. You can also purchase genuine HP cartridges and supplies from other retailers.

Replace the print cartridge color that is not adhering to the paper. Defect Explanation Background scatter Banding and horizontal lines Black lines Character voids Distorted image Dropouts Faded print or random faded areas No image available Ghosting Gray streaks No image available Imaging poochee replied Feb 11, 2017 at 12:16 AM Sign of the times poochee replied Feb 11, 2017 at 12:14 AM Oddly Enough #2 poochee replied Feb 11, 2017 at 12:13 AM Replace the black print cartridge.

The spots or streaks will not look raised, but will feel raised to the touch. Also, remove any paper protruding from the rear of the duplix unit. Hide thumbs 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 Search Windows for devices, and click Devices and Printers in the list of results.

If two or more pieces of media are being selected at once, it may help to decrease the tension (turn the adjustment clockwise). Print Quality Checklist Redistribute the toner in the toner cartridge (see " The toner Cartridge" in Chapter 7). Redistributing the toner Redistribute the toner when it is low, faded or when light areas appear on a printed page. Advertisement Recent Posts (0xc000007b) error Noknojon replied Feb 11, 2017 at 12:42 AM Good Ideas!