Home > Hp Deskjet > HP Deskjet 932c Printer Problem

HP Deskjet 932c Printer Problem

Contents

Your printer should be ok now, if the lever was stuck. A new ink cartridge and cleaning does not solve the problem. With the power on, open the top cover and the "print cartridge holder assembly" will move over towards the left or center position. I figure the printer just needs to be adjusted some how because the document prints just fine on the black and white printer. check over here

Then use damp Q-TIPS to finish cleaning up that area, including the shaft just above the absorber pad and the gear on the right end of that shaft. Wipe the rubber paper feed rollers with the damp cloth. Appears to be no power to printer. Scroll to the bottom of the page, and then make sure the country/region location is correct. http://support.hp.com/us-en/document/bud09170

Hp Deskjet 932c Troubleshooting Blinking Light

Option one: Print a self-test report from the control panel Press and hold the Power button (). Any Tips.. Check for any paper or objects that might be stopping the carriage. Look over the top of the printer and watch those paper guides as you roll that feed roller.

  • It does not raise up to clear the paper guides and hangs up.Is there a service manual for the 932C?Dave by unknown on Dec 30, 2003 at 7:01pm Add comment Please
  • Unplug the motor connector to free the service station from the mechanism.
  • it brings up a windowthat has about 4 tabs in it...
  • Yes, I'll Whitelist Cancel Home Forums Search Forums Recent Posts Your name or email address: Password: Forgot your password?
  • I'm giving you the complete service station removal and cleaning instructions.
  • Tip Hold in the power Button and press the Resume button four times and you'll get a printout that shows the page count and some other stuff.
  • Option one: Print a self-test report from the control panel Press and hold the Power button ().
  • Press the Power button () to turn on the product.
  • Repeat the previous steps to insert the other cartridge.
  • For every print job it ejects a blank page.

I had bought a prefilled black cartridge at the same time as getting the other one refilled so I swaped them and the prefilled one works fine now.emw1917, I've never heard by unknown on Aug 27, 2004 at 11:31am Add comment Please sign in to comment 0 If you bought it recently, any ethical supplier should replace it. Notices And Acknowledgments6................................................................................................................................................................ Hp Deskjet 932c Manual Figure : Open the cover on the product Remove jammed paper from the front of the product.

Figure : Open the cartridge latch to remove the cartridge Repeat the previous steps to remove the other cartridge. Option two: Print a self-test report from HP Toolbox Open the HP Toolbox: Windows XP Click Start, click All Programs, click HP, click the folder for your HP product, and then Note: This tool applies to Microsoft Windows PC's only. http://support.hp.com/us-en/product/HP-Deskjet-900-Printer-series/25305/model/19034/manuals Trying to clear jammed paper from the front of the product can damage the print mechanism.

With regard to the paper catching, when I compare the routine to my other 930, it would appear that the bar behind the stickyup pieces should stay up, holding the paper Hp Deskjet 932c Clean Print Head Windows XP: Click Start, and then click Printers and Faxes. Its more likely that the electrical contacts on the ink cartridge, or inside the Print Cartridge Holder Assembly, may simply be dirty. It will not print blue or black.

Hp Deskjet 932c Driver

Figure : Remove jammed paper Reattach the rear access door, and then turn the knob on the door clockwise to lock it into place. http://www.fixyourownprinter.com/posts/28461 any Ideas by JamesC on Aug 23, 2005 at 9:54am Add comment Please sign in to comment 1 My printer is printing in reverse order, i.e., the last page prints first. Hp Deskjet 932c Troubleshooting Blinking Light If you are at around 30K pages, I suggest disassembly and cleaning. Hp Deskjet 932c Ink Cartridges How to print a self-test report Choose one of the following options to print a self-test report.

I suggest that you get some help from a friend. check my blog Choosing Your Printer11................................................................................................................................................................ by Bert on Aug 10, 2004 at 9:10pm Add comment Please sign in to comment 0 Please, please, please, please. (Sound like James Brown, huh!?) Here is my problem. Then restart your PC without the printer attached. Hp Deskjet 930c Ink Light Flashing

Once reported, our moderators will be notified and the post will be reviewed. Can someone help?Thanks. you will either need to reinstall and then search the CD that came with the printer or go to the HP web site and download the latest software from them directly.Also this content Automatic Two-sided Printing Module47................................................................................................................................................................

I checked toolbox and it seemed the black catrtidge was emtpy.I ignored the light for a few days and now the printer has started clicking every 7 or so seconds.I've since Hp Deskjet 932c Driver Windows 10 Modify your browser's settings to allow Javascript to execute. Print Cartridge Status Light52................................................................................................................................................................

Disconnect the power cord from the rear of the product.

If the issue persists, continue with the next solution. HP Printer Support 260 737 visningar 11:32 HP hewlett packard deskjet 850c - Längd: 3:11. When the intray is pulled out there is wet ink on the underside. Hp Printer Blinking Orange Light Finally I followed HP's recommendation (which had seemed lame at the time) to *unplug* the printer (don't just turn it off) for a couple minutes, and then try again.

Close the cover on the product. Remove the screw securing the power supply and the plastic box surrounding it. 3. My 932C suddenly won't print. have a peek at these guys Figure : Open the cover on the product With the product turned on, disconnect the power cord from the rear of the product.

If they don't, I can usually push a bit and then they move down, but it feels as if there is resistance, like maybe something is sticking. The yellow arrow points to the Black Cartridge Problem icon. Paper jams should be removed through the rear access door.The printer must be partially disassembled to replace what is correctly called the paper pusher. by unknown on Apr 8, 2006 at 6:07am Add comment Please sign in to comment 0 Replace the carriage board and/or cable.Check the pins on the carriage board to see in

Unplug the printer and now you can manually slide that assembly all the way over to the far left end of the printer. Solution one: Feed the paper Press the Resume button () to feed the paper. Find support and troubleshooting info including software, drivers, and manuals for your Troubleshooting Software and Drivers 3 How to Product Information User Guides Video Tutorials More Support Options Solution Printing On Different Types Of Paper And Media20................................................................................................................................................................

Product Specifications For The Hp Deskjet 960 Series Printer100................................................................................................................................................................ So I reconnected the parallel cable and then went back on the internet to print. I have download the new windows XP Driver off HP site and it fix it for about two pages and now it does it again but it does not do it Check by printing something off the internet and see what happens.

Step five: Print a self-test report Print a self-test report to make sure that the hardware functions correctly. The self-test report prints. The slots are between the left two feed rollers. If these steps resolved the issue, and the test page prints, there is no need to continue troubleshooting.

Determine the issue, based on the icon the yellow arrow points to, and then expand that section for solutions.