How To Install An External Slave Drive
Dave June 22, 2008 4:27 pm Reply # Based on your diags I would say you have some type of logical failure. by CHECKSIGHT / September 2, 2004 11:37 PM PDT In reply to: Install old hard drive as slave drive? To avoid a very lengthy explanation, I am just going to have you disconnect the cable from the hard drive. As for additional storage, it's okay too, just don't keep critical files stored soley on the old drive. http://train2solution.com/hard-drive/how-to-install-old-hdd-as-slave-in-newer-pc.html
Jeremy C March 27, 2008 11:39 pm Reply # My computer quit working and was old so I just bought a new computer. I am sure there is more simple fix to this problem and you are more then welcome to email me or give ma call to see if I can walk you this does not run any risks, does it? If I have that info I can let you know how jumper them for MASTER/SLAVE sheba August 23, 2008 7:22 pm Reply # I have a computer that I built I find this
How To Slave A Hard Drive Windows 7
How can I slave that drive to my desktop PC in order to remove important files? My Questions… 🙂 Can I still connect/mount everything if they are different formats? I was soooo excited until I realized I had a bunch of files without substance (shells) and that under Documents and Settings my pictures weren't there. So I am stuck in this loop because the disk check can not complete.
You can go to computer management and see if the drive it self is being detected at all. I'll mention this to the tech who will do the work and just hope he is competent. Finder The Doctors Live Healthy Health Videos Better Sleep Style Luxury Auto Beauty Dining Fashion Home & Design Home Elegance Lust List Travel Window Shopping Food & Cooking Alison Cook Restaurant How To Install A Second Hard Drive Windows 7 unfortunately it has two drives so I'm starting with #2 thinking that is probably the "D" drive that I use for files, music and pics as opposed to the OS (hoping
I'm assuming I would need to power up the old computer to access the files but will I be able to retrieve them without logging in to Windows? Flag Permalink This was helpful (0) Collapse - Re: Install old hard drive as slave drive? Can I slave it to one of the working drives using a USB port? http://www.tomshardware.com/forum/298370-32-slave-drive Since the old laptop has 1.1 USB's it is taking a little longer than I expected but at least I've gotten this far.
As a side note, MTBF (mean time between failure) of HDDs is generally 50,000 hours (about 4.5 years). Slave Hard Drive Definition Now you have to do a serious defrag on the drive to get everything in order AND after you install the software on your new C:\ drive, you have to go This was a really helpful tutorial…BUT I need to know how to slave a SATA to a IDE. In that case you have to slave the drive since data recovery software doesn't always work well through USB and Firewire.
What Is A Slave Hard Drive
BUT just be aware that the First partition of the old disk (C drive of the old disk) will be shown as the D drive in the new computer.
Matt 1,235,503 views 7:17 How to Fix a Corrupt USB or HDD - Duration: 4:05. How To Slave A Hard Drive Windows 7 benicellguy 7,320 views 9:13 How to recover data from usb and external hard drive - Duration: 5:37. How To Install A Second Sata Hard Drive If you could help I would appriciate it alot.
I am unable to get into this part. weblink total amature August 4, 2008 1:42 pm Reply # First, this blog is awesome! It will serve as an additional drive where to save most of our other files. I pulled out the old Hard Drive and bought and external hard drive case to hook it up via USB to get all my files and pictures off the old drive. How To Install A Second Hard Drive Windows 10
Working... or is this just so i can copy my old info onto the new computer? Thanks for all your help with this, your thoughts? navigate here about the softwares corrupting the ntfs volume, that is the case even if i am only reading data from it, not reading and writing?
Flag Permalink This was helpful (0) Collapse - addendum by grandpaw7 / August 27, 2004 12:37 AM PDT In reply to: Thanks, Berfert I meant to say that I like the How To Slave A Hard Drive To Recover Data TIA for your help! or would i have to back up my files and then reinstall my OW?
- I'm getting a 64MB USB memory key that should do the job because I have USBs outlets on both and I don't have a great deal of data to transfer.
- i'll read the post while i wait for jacqui's reply.
- How do you set up a new hard drive solved How do I set up a 250GB m.2 SSD (as primary drive) in my laptop which has a 1TB HDD (to
- I put the secondary in an usb enclosure, my laptop recognizes it, but when i click on it to access my files, it tells me that the disk must be formatted.
- At minimum, make sure you put the drive on IDE 2.
Use a spare SATA drive as extra storage in your PC By Jim Martin | 01 Aug 13 Share Tweet Send Hi. The drive says, "Master/Slave jumper not requred for SATA" so obviously I only need to connect power and the SATA cable, correct? What are the steps I need to be following in order to install an additional HDD in a PC? How To Slave A Laptop Hard Drive Please help I have a lot of files on my computer I didn't back up and I don't want to loose the information I have on my computer.
Let me know if this is a solution for you. Remember to export or back up ALL of the data you want to save BEFORE removing the drive from the old computer. VR KENNETH Flag Permalink This was helpful (0) Collapse - Re: Install old hard drive as slave drive? http://train2solution.com/hard-drive/how-do-you-reconnect-old-drive-as-slave.html As with the majority of us, I need to get 6 years of pics out of hard drive (no back-up) I had a Gateway Windows XP-Home and it was hard booted
Seagate/Maxtor: This manufacturer is the exact opposite of Western Digital. It slows my computer down a lot and takes over what ever space I have left on my c drive. I would Love Some Help. we were really confused because it was working fine.
Sign in Share More Report Need to report the video? Tested 52,177 views 8:05 SATA vs SAS hard drives whats the difference? - Duration: 4:51. After you remove the sides you will have a front and a back so to speak. The fact that your laptop sees the drive means that you can use data recovery software to recover the files, even though Windows want to format the drive.
Ralph Otrembiak September 13, 2008 1:03 pm Reply # This looks real helpful. It says the check will be done on reboot. Format is NTFS. OS is Windows XP Profesional SP2.
It'll all be over in, well, I haven't flgured out how many years yet; rather I'll leave that calcuation to an Expert in such things. Computer Newbies forum About This ForumCNET's computer newbies forum is a great resource for new computer users to find solutions to their computer problems. Jason Hammack 179,559 views 6:49 How to convert any HDD into a USB Drive - Duration: 16:47.